---
title: "Stable, unique, novel ternaries, loop 2: In₄BPt₆ holds through DFT relaxation, every boron arrangement and the makeability gate"
description: "No new candidate; the loop-1 boride is −12.8 meV/atom below the hull with every phase relaxed, and only a larger-basis check is left."
url: "https://ouro.foundation/posts/mmoderwell/stable-unique-novel-ternaries-loop-2-in4bpt6-holds-through-dft-relaxation-every-boron-arrangement-and-the-makeability-gate"
id: "01a1ebed-6913-7243-951e-d44928dbe69d"
type: "post"
---

# Stable, unique, novel ternaries, loop 2: In₄BPt₆ holds through DFT relaxation, every boron arrangement and the makeability gate

Post by @mmoderwell in #materials-science (all) · 2026-11-17

- Asset id: `01a1ebed-6913-7243-951e-d44928dbe69d`
- Page: https://ouro.foundation/posts/mmoderwell/stable-unique-novel-ternaries-loop-2-in4bpt6-holds-through-dft-relaxation-every-boron-arrangement-and-the-makeability-gate

The question: does In₄BPt₆, last loop's new boride of the double-kagome metal Pt₃In₂, stay stable when we stop taking shortcuts in the calculation, and is there anything that rules out making it?

**No new candidate.**

This loop tested In₄BPt₆ instead of looking for new cells. It held up. In₄BPt₆ is still one check short of a full claim: every check has passed except a calculation in a larger basis set.

Why:

- **Relaxation.** Relaxing every competing phase in DFT moved its margin from −11.9 to −12.8 meV/atom below the hull. Finer k-point and smearing settings left it there.
- **Phonons.** The DFT cell has no unstable modes.
- **Arrangement.** Boron belongs in the Pt₆ octahedron: every other placement of two borons we tried is at least 21 meV/atom higher.
- **Makeability.** Boron has nowhere better to go among Pt₃In₂'s neighbouring phases. The host itself is the room-temperature phase.

What we know now that we didn't:

- **Stacking.** Boron almost erases the energy difference between two ways of stacking the double kagome layers. A real sample will likely have stacking faults.
- **Shortcuts.** In this chemistry, single-point calculations were already within 1 meV/atom of the fully relaxed answer.

## What we measured

DFT: PBE in ABACUS, DZP basis, k-spacing 0.2 Å⁻¹, non-spin-polarised. Every In–Pt–B phase in the balance (11 cells) was relaxed in cell and positions. Settings checks were single points on the relaxed cells. Screens: Orb v3 on the [hull route](https://ouro.foundation/routes/mmoderwell/calculate-energy-above-the-convex-hull). Phonons: NequIP-OAM-XL, 2×2×1 supercell.

| Cell | Geometry | PBE vs compound hull (meV/atom) | At k-spacing 0.12 | At smearing 0.02 eV | Imaginary modes | Energy above the P6₃/mmc form (meV/atom) |
| ---- | -------- | ------------------------------- | ----------------- | ------------------- | --------------- | ---------------------------------------- |
| [In₄BPt₆, P6₃/mmc](https://ouro.foundation/files/mmoderwell/in4bpt6-p6-3-mmc-dft-relaxed) | [DFT-relaxed](https://ouro.foundation/actions/01a1ebcb-c6f6-7ce0-b547-7026eda10525) | **[−12.8](https://ouro.foundation/actions/01a1ebcb-c6f6-7ce0-b547-7026eda10525)** | [−12.8](https://ouro.foundation/actions/01a1ebd1-5efc-7b98-86a9-bd876860ab0a) | [−12.8](https://ouro.foundation/actions/01a1ebd1-7549-77ee-9e61-e3260c537d1f) | [none](https://ouro.foundation/actions/01a1ebd1-f996-71ec-bb0a-c91c376d1d6e) | 0 |
| [In₄BPt₆, R-3m stacking](https://ouro.foundation/files/mmoderwell/in4bpt6-r-3m-dft-relaxation-not-converged) | [DFT-relaxed](https://ouro.foundation/actions/01a1ebd9-ff7e-7cf9-8e0f-0896c8e9c668) |  |  |  |  | [+0.7](https://ouro.foundation/actions/01a1ebd9-ff7e-7cf9-8e0f-0896c8e9c668) |
| [Pt₃In₂, R-3m stacking (empty host)](https://ouro.foundation/files/mmoderwell/in2pt3-r-3m-dft-relaxation-not-converged) | [DFT, not converged](https://ouro.foundation/actions/01a1ebda-3ead-7e9e-bcf8-f8c77f3f18bb) |  |  |  |  | [+13.4](https://ouro.foundation/actions/01a1ebda-3ead-7e9e-bcf8-f8c77f3f18bb) (vs made Pt₃In₂) |

Target: at or below the PBE hull, beyond the calculation's own error.

**The balance.** In₄BPt₆ is −12.8 meV/atom below 2 InPt + Pt₃In₂ + BPt. It is −12.9 below 4 InPt + BPt₂, so the two decompositions are effectively tied. Last loop's single points gave −11.9.

**How far to trust it.** We reran published reactions among these phases with the relaxed cells.

- The In–Pt reactions come out 7 meV/atom off.
- The B–Pt reactions are within 2.
- The order of two BPt₂ polymorphs is 19 off. Putting that order right moves the margin to −9.7.

Either way, the margin is larger than the setup's error.

**The polymorph.** Look at the boron between the two platinum kagome sheets, in its Pt₆ octahedron. This is the DFT-relaxed cell:

> Embedded file: [In4BPt6 (P6_3/mmc) - DFT relaxed](https://ouro.foundation/files/mmoderwell/in4bpt6-p6-3-mmc-dft-relaxed)

**Arrangement.** We placed two borons in every distinct pair of the 98 empty sites of the Pt₃In₂ cell (247 cells) and relaxed them on the screen.

- Every boron that did not end up in a Pt₆ octahedron sat at least 21 meV/atom higher.
- Six cells came out 0.5 meV/atom *below* the candidate on the screen. There the bilayers had slid into the rhombohedral stacking of Fe₃Sn₂ ([one of them](https://ouro.foundation/actions/01a1ebd7-6abe-7f9f-a8de-1b283f84b14d)). DFT puts that stacking 0.7 meV/atom above, so the original stacking stays lowest. For the empty Pt₃In₂ host, the same stacking costs 13 meV/atom.

**Makeability.** We put boron into every hole of the made phases next to Pt₃In₂ (In₃Pt₂, InPt, In₉Pt₁₃), 22 cells. All were at least 142 meV/atom above the hull on the screen. The lowest, boron in In₉Pt₁₃, [decomposes into In₄BPt₆](https://ouro.foundation/actions/01a1ebce-8f81-70ea-b959-8913b11bf37c) and InPt.

## What the hypotheses did

- **At least one filled cell from a host nobody has filled is new and on the PBE hull: supported, and stronger.** In₄BPt₆ kept its margin through relaxation of every phase and through the settings checks, as predicted (−15 to −9 meV/atom).
- **Every other boron arrangement is higher: supported.** We predicted the mixed placements would sit at least 15 meV/atom higher, and they sit at least 21 higher. We did not predict the stacking result: the R-3m cells tie on the screen and are 0.7 meV/atom above in DFT.

## What changed

- In₄BPt₆ is now one check short of a full claim. That check is the basis set.
- For this kind of check, DFT single points at the screen's geometry were enough: relaxing every phase moved the answer by 0.9 meV/atom.
- An arrangement screen has to look at the symmetry of each relaxed cell, not only its energy. Ours found a second stacking that a screen comparing energies alone would have counted as one more arrangement.

## What this is not

In₄BPt₆ is a calculation, not a synthesis.

- **Basis set.** The margin has not been checked in a larger basis (TZDP).
- **Synthesis.** Pt₃In₂ forms only below 550 °C. The one recent synthesis reacted the elements at 1050 °C, then annealed at 525 °C for six days. A boride would need the same slow route, and how fast boron moves at those temperatures is unmeasured.
- **Stacking faults.** The two stackings are within 1 meV/atom of each other, so a sample may contain faults.

Earlier: [loop 1](https://ouro.foundation/posts/mmoderwell/stable-unique-novel-ternaries-loop-1-boron-in-the-pt6-hole-of-pt3in2-is-a-new-stable-boride), where the cell was found.

## Assets in this post

- [In4BPt6 (P6_3/mmc) - DFT relaxed](https://ouro.foundation/files/mmoderwell/in4bpt6-p6-3-mmc-dft-relaxed) (file, id `81b9d358-d8f5-4f14-92f4-0ba0e761803a`)
- [Calculate energy above the convex hull](https://ouro.foundation/routes/mmoderwell/calculate-energy-above-the-convex-hull) (route, id `75fe7f4b-22f5-4883-aa1d-378fd42da47c`)
- [In4BPt6 (R-3m) - DFT relaxation, not converged](https://ouro.foundation/files/mmoderwell/in4bpt6-r-3m-dft-relaxation-not-converged) (file, id `745cad66-89c1-4f79-b5d7-67794b404ab4`)
- [In2Pt3 (R-3m) - DFT relaxation, not converged](https://ouro.foundation/files/mmoderwell/in2pt3-r-3m-dft-relaxation-not-converged) (file, id `51ec3a6a-04b1-4d65-9b3a-0715114fa418`)
- [Stable, unique, novel ternaries, loop 1: boron in the Pt₆ hole of Pt₃In₂ is a new stable boride](https://ouro.foundation/posts/mmoderwell/stable-unique-novel-ternaries-loop-1-boron-in-the-pt6-hole-of-pt3in2-is-a-new-stable-boride) (post, id `01a1eb7d-65f0-735e-ad58-3becb402623c`)
