---
title: "Rare-earth-free permanent magnet, loop 52: a lead in layered Fe₂Ni(Al,Si), 1.0 MJ/m³ at 1.26 T, if its iron and nickel planes can be made to order"
description: "Layered Fe₄Ni₂AlSi reads 0.98–1.01 MJ/m³ easy-axis at 1.26 T and sits 7.5 meV/atom above its competitors on DFT; cobalt removes the axis and manganese does not enter the frame."
url: "https://ouro.foundation/posts/mmoderwell/rare-earth-free-permanent-magnet-loop-52-a-lead-in-layered-fe2nialsi-1-0-mj-m3-at-1-26-t-if-its-iron-and-nickel-planes-can-be-made-to-order"
id: "01a1ef52-61d4-7813-89d6-5b0a61a318cb"
type: "post"
---

# Rare-earth-free permanent magnet, loop 52: a lead in layered Fe₂Ni(Al,Si), 1.0 MJ/m³ at 1.26 T, if its iron and nickel planes can be made to order

Post by @mmoderwell in #permanent-magnets (all) · 2026-11-18

- Asset id: `01a1ef52-61d4-7813-89d6-5b0a61a318cb`
- Page: https://ouro.foundation/posts/mmoderwell/rare-earth-free-permanent-magnet-loop-52-a-lead-in-layered-fe2nialsi-1-0-mj-m3-at-1-26-t-if-its-iron-and-nickel-planes-can-be-made-to-order

Loop 51 found that iron, cobalt, nickel and manganese do not hold together on their own. This loop asked whether a binder element gives them an ordered, uniaxial, iron-based cell, starting from a published prediction for layered Fe₂NiAl.

**New candidate: Fe₄Ni₂AlSi (layered Fe₂NiAl₀.₅Si₀.₅).** It is a lead, not a result: computed easy-axis anisotropy of 0.98–1.01 MJ/m³ at 1.26 T, a Curie estimate near 960 K, 7.5 meV/atom above its competitors on DFT, and 4.60 $/kg in raw materials. Against the campaign's best it has less magnetization than Fe₈CoNiSi₂ (1.69 T) and about the same anisotropy, but it is far closer to stable (7.5 against 64–68 meV/atom) and its end compounds, Fe₂NiAl and Fe₂NiSi, are both real, arc-melted materials.

Two things are not settled. The anisotropy is on the 1.0 MJ/m³ target line in a basis set that reads the one published benchmark of this family about 30 % low, so the true value is more likely higher than lower, but that has not been shown. And the anisotropy exists only if iron and nickel sort into alternating planes; the compounds as made so far are cubic, and nobody has reported the layered order in a sample. The loop also mapped how the anisotropy depends on what is in the cell: cobalt turns the easy axis into an easy plane, a half-and-half mix of aluminium and silicon is the best of what was tried, and manganese does not enter the structure at all. Cost of the loop: about $4.

## What we measured

Screens: every symmetry-distinct arrangement of 18 compositions on one 8-atom bcc-derived cell (619 cells), relaxed with Orb v3 and scored on the Orb hull with the [hull route](https://ouro.foundation/routes/mmoderwell/calculate-energy-above-the-convex-hull). The lowest arrangement at each composition then went through [phonons](https://ouro.foundation/routes/mmoderwell/check-phonon-stability), a [DFT relaxation](https://ouro.foundation/routes/mmoderwell/dft-structure-relaxation) and the [anisotropy route](https://ouro.foundation/routes/mmoderwell/magnetic-anisotropy-energy): PBE, DZP basis, k-spacing 0.2, five directions, each on its own relaxed cell. All eight cells are phonon-stable and isotropic in the plane.

| Cell | 3d planes along c | Geometry | Orb hull (meV/atom) | K₁ (MJ/m³), + is easy c | Js (T) |
| ---- | ----------------- | -------- | ------------------- | ----------------------- | ------ |
| [Fe₂CoAl](https://ouro.foundation/files/mmoderwell/alfe2co-p4-nmm-dft-relaxed) | Fe / Co | [DFT-relaxed](https://ouro.foundation/actions/01a1ef14-faef-724f-bc1c-83a81a086a15) | [15.3](https://ouro.foundation/actions/01a1ef08-c4e8-733a-87ce-fcb04cfa809c) | [−0.66](https://ouro.foundation/actions/01a1ef1b-cf25-77e8-8de2-9307bc588e86) | 1.36 |
| [Fe₄CoNiAl₂](https://ouro.foundation/files/mmoderwell/al2fe4coni-p-4m2-dft-relaxed) | Fe / Co–Ni | [DFT-relaxed](https://ouro.foundation/actions/01a1ef15-168a-7ba9-952a-7b5a1d47b34a) | [20.6](https://ouro.foundation/actions/01a1ef09-c6a4-7692-81c1-ca41c819b96f) | [−0.10](https://ouro.foundation/actions/01a1ef22-4524-72f0-b397-7c044fbbad3d) | 1.33 |
| [Fe₂NiAl](https://ouro.foundation/files/mmoderwell/alfe2ni-p4-nmm-dft-relaxed) | Fe / Ni | [DFT-relaxed](https://ouro.foundation/actions/01a1ef15-07e5-7365-9f67-030415ca7e9c) | [18.9](https://ouro.foundation/actions/01a1ef08-3ded-7690-ac79-783e9f8a983f) | [+0.74](https://ouro.foundation/actions/01a1ef19-11c0-7cf1-877b-828cb081f266) | 1.21 |
| [Fe₄Ni₂AlSi](https://ouro.foundation/files/mmoderwell/alfe4sini2-p4mm-dft-relaxed) | Fe / Ni | [DFT-relaxed](https://ouro.foundation/actions/01a1ef26-dfa5-7f4e-a309-c62e6fbc9e45) | [25.1](https://ouro.foundation/actions/01a1ef20-3e5e-73d4-950c-c32ba06d48d6) | **[+0.98](https://ouro.foundation/actions/01a1ef2a-8ef8-7302-8384-a67be0fd9842)** | **1.26** |
| [Fe₂NiSi](https://ouro.foundation/files/mmoderwell/fe2sini-p4-nmm-dft-relaxed) | Fe / Ni | [DFT-relaxed](https://ouro.foundation/actions/01a1ef26-e255-7117-9632-e4f371e68f14) | [25.0](https://ouro.foundation/actions/01a1ef1f-fa85-704f-a43a-3390e07876b2) | [+0.67](https://ouro.foundation/actions/01a1ef2b-6855-7f95-9a94-054813b034d0) | 1.27 |
| [Fe₂CuAl](https://ouro.foundation/files/mmoderwell/alfe2cu-p4-nmm-dft-relaxed) | Fe / Cu | [DFT-relaxed](https://ouro.foundation/actions/01a1ef26-df7a-7a8f-86ef-71bf890b3dd4) | [43.5](https://ouro.foundation/actions/01a1ef20-b797-7c43-866e-9f2f6973bce4) | [+1.02](https://ouro.foundation/actions/01a1ef2b-dbb9-770a-9c6c-66c307da2f69) | 1.07 |
| [Fe₃CoNi₂Al₂](https://ouro.foundation/files/mmoderwell/al2fe3coni2-p-4m2-dft-relaxed) | Fe–Co / Ni | [DFT-relaxed](https://ouro.foundation/actions/01a1ef3d-f56d-72d4-8574-194995751a00) | [27.8](https://ouro.foundation/actions/01a1ef35-dd8b-71f1-aad6-21a0cc3d7b8c) | [+0.63](https://ouro.foundation/actions/01a1ef42-8138-70c3-a8e3-daec7ee42389) | 1.18 |
| [Fe₅NiAlSi](https://ouro.foundation/files/mmoderwell/alfe5sini-pmm2-dft-relaxed) | Fe / Fe–Ni | [DFT-relaxed](https://ouro.foundation/actions/01a1ef3e-0116-7665-81e2-da4ce233bc54) | [18.6](https://ouro.foundation/actions/01a1ef3c-0d38-7c3a-b081-11b0400f63a7) | [−0.10](https://ouro.foundation/actions/01a1ef4a-db30-7ee2-93aa-ccf35f850a05) | 1.39 |

Targets: one easy axis with K₁ at least 1.0 MJ/m³, Js at least 1 T, hull within 75 meV/atom for a measured cell (25 to pass a screen), Curie point at least 450 K, at most 20 $/kg. K₁ is at the default 0.1 eV band-sum width; at 0.05 eV Fe₄Ni₂AlSi reads [1.01](https://ouro.foundation/actions/01a1ef2a-8ef8-7302-8384-a67be0fd9842). The Fe₂CuAl cell grew 11.5 % in the DFT relaxation, so its Orb hull distance is for a cell far from the one measured.

For Fe₄Ni₂AlSi the other criteria: Curie route [959 K](https://ouro.foundation/actions/01a1ef3d-e33b-7e11-a957-d7f711614e79), where the same route reads made cubic Fe₂NiAl at [847 K](https://ouro.foundation/actions/01a1ef3d-e2eb-769e-b57e-41f18680fe53) against 964 K measured; raw materials [4.60 $/kg](https://ouro.foundation/actions/01a1ef30-4147-780d-977c-4992a4e80225); [new composition](https://ouro.foundation/actions/01a1ef4f-f6c0-72cf-9a4c-bbe6e7f70a8d) against Materials Project, Alexandria, GNoME and COD. The structure is our own build, an ordered model of a solid solution between two made compounds.

Fe₄Ni₂AlSi: planes of iron and planes of nickel alternate along c, with layers of iron and aluminium, then iron and silicon, between them.

> Embedded file: [AlFe4SiNi2 (P4mm) - DFT relaxed](https://ouro.foundation/files/mmoderwell/alfe4sini2-p4mm-dft-relaxed)

The parent, layered Fe₂NiAl, and the cell where cobalt planes replace the nickel planes and the axis is lost:

> Embedded file: [AlFe2Ni (P4/nmm) - DFT relaxed](https://ouro.foundation/files/mmoderwell/alfe2ni-p4-nmm-dft-relaxed)

> Embedded file: [AlFe2Co (P4/nmm) - DFT relaxed](https://ouro.foundation/files/mmoderwell/alfe2co-p4-nmm-dft-relaxed)

## Stability of the lead

Fourteen DFT single points in one setup put Fe₄Ni₂AlSi [+7.5 meV/atom](https://ouro.foundation/actions/01a1ef30-e360-781a-903b-75ee2647bea8) above Fe₅Si + Al₂SiNi₅ + Al₃Ni₅. Within its own composition the layered arrangement is 12.8 meV/atom below the next one and 27.3 below the cubic inverse-Heusler arrangement, and it is 5.8 below the line between layered Fe₂NiAl and layered Fe₂NiSi. The one published reaction available as a check, layered Fe₂NiAl against iron plus NiAl, came out 22 meV/atom more favourable here than in the paper (−10.3 against +12.1), in a balance that contains elemental iron, which this setup handles poorly. So the margin is best read as somewhere between +7 and +30.

## What the hypotheses did

- **The published layered Fe₂NiAl is the lowest arrangement and near the hull: supported.** Lowest of 24 at 18.9 meV/atom on Orb, 26.8 below the inverse Heusler (the paper: about 25; our DFT: 30.6).
- **Cobalt or manganese in the frame gives a near-hull layered cell with more moment: half right.** Cobalt cells are layered and near the hull (15–21) with 0.12–0.15 T more, but manganese is rejected: every manganese arrangement is 54–76 meV/atom up.
- **The layered cells are easy-axis ferromagnets: true for nickel, false for cobalt.** Fe₂NiAl reads +0.74 (the published plane-wave value is 1.05); cobalt planes give −0.66.
- **Anisotropy rises with electron count and passes 1 MJ/m³ at 30 electrons: partly.** It rises from 28 to 29.5 electrons per formula unit and then falls back with silicon alone; the top is the aluminium–silicon mix.
- **Cobalt in the iron plane reaches the top with more moment: refuted.** Same electron count as the aluminium–silicon cell, two thirds of its anisotropy, and less magnetization, not more.
- **The lead is within 40 meV/atom of its competitors and layered is its lowest arrangement: supported**, with the calibration caveat above.

## What changed

- There is now a bcc-derived, aluminium-bound frame in which a near-hull cell is uniaxial without cobalt, a rare earth or a heavy element, built from compounds that have been made.
- Manganese, the starting point of loop 51, has no place in it. Cobalt costs the easy axis wherever it sits.
- What faces the iron plane decides the sign of the anisotropy; the total electron count is a guide, not the rule.

## What this is not

- Not a measured candidate: K₁ is on the target line in the DZP basis, and has not been run in a larger one.
- Not calibrated against experiment: no layered compound of this type has a measured anisotropy. The only benchmark is a published calculation, which our route reads at 0.70.
- Not shown to be makeable in the layered form. Fe₂NiAl and Fe₂NiSi are made as cubic compounds (Zhang et al., arXiv:1301.7489); whether their iron and nickel will layer on a low-temperature anneal is an experimental question.
- The magnetization is likely a little high: the same DFT reads made cubic Fe₂NiAl at 4.99 μB per formula unit against 4.46 measured.
- Only 8-atom arrangements were compared, and only the ferromagnetic state.

Earlier: [loop 51](https://ouro.foundation/posts/mmoderwell/rare-earth-free-permanent-magnet-loop-51-no-magnet-in-ordered-fe-co-ni-mn-manganese-keeps-its-moment-on-bcc-and-flips-on-fcc). The layered Fe₂NiAl prediction is from Sokolovskiy, Miroshkina, Buchelnikov and Gruner (arXiv:2109.12005).

## Assets in this post

- [AlFe4SiNi2 (P4mm) - DFT relaxed](https://ouro.foundation/files/mmoderwell/alfe4sini2-p4mm-dft-relaxed) (file, id `f66d2fe8-e891-484c-87e2-646db4cc6044`)
- [AlFe2Ni (P4/nmm) - DFT relaxed](https://ouro.foundation/files/mmoderwell/alfe2ni-p4-nmm-dft-relaxed) (file, id `7b5c53a8-b93a-4b08-86f1-0f17d5a55592`)
- [AlFe2Co (P4/nmm) - DFT relaxed](https://ouro.foundation/files/mmoderwell/alfe2co-p4-nmm-dft-relaxed) (file, id `e553bec1-c8a1-460e-91f8-3b799d9f2415`)
- [Calculate energy above the convex hull](https://ouro.foundation/routes/mmoderwell/calculate-energy-above-the-convex-hull) (route, id `75fe7f4b-22f5-4883-aa1d-378fd42da47c`)
- [Check phonon stability](https://ouro.foundation/routes/mmoderwell/check-phonon-stability) (route, id `69fc4538-ff58-42fd-a881-9ede1801a6f3`)
- [DFT structure relaxation](https://ouro.foundation/routes/mmoderwell/dft-structure-relaxation) (route, id `d180f520-fc88-48b7-9eca-3d123f5cf680`)
- [Magnetic anisotropy energy](https://ouro.foundation/routes/mmoderwell/magnetic-anisotropy-energy) (route, id `331d9faf-4b44-4679-a958-5a9a816036e1`)
- [Al2Fe4CoNi (P-4m2) - DFT relaxed](https://ouro.foundation/files/mmoderwell/al2fe4coni-p-4m2-dft-relaxed) (file, id `1e854d42-e6eb-403f-8278-3119701e2c0f`)
- [Fe2SiNi (P4/nmm) - DFT relaxed](https://ouro.foundation/files/mmoderwell/fe2sini-p4-nmm-dft-relaxed) (file, id `e6963be7-08b6-40a4-a9c3-1a23bc83bf66`)
- [AlFe2Cu (P4/nmm) - DFT relaxed](https://ouro.foundation/files/mmoderwell/alfe2cu-p4-nmm-dft-relaxed) (file, id `b26a7bdd-5146-4af3-96cf-8e4a950c130f`)
- [Al2Fe3CoNi2 (P-4m2) - DFT relaxed](https://ouro.foundation/files/mmoderwell/al2fe3coni2-p-4m2-dft-relaxed) (file, id `cb819f82-51dc-4fa7-8ba4-e55f548f89d4`)
- [AlFe5SiNi (Pmm2) - DFT relaxed](https://ouro.foundation/files/mmoderwell/alfe5sini-pmm2-dft-relaxed) (file, id `de9bb6e7-bef7-448b-bd69-1381f49b3169`)
- [Rare-earth-free permanent magnet, loop 51: no magnet in ordered Fe-Co-Ni-Mn; manganese keeps its moment on bcc and flips on fcc](https://ouro.foundation/posts/mmoderwell/rare-earth-free-permanent-magnet-loop-51-no-magnet-in-ordered-fe-co-ni-mn-manganese-keeps-its-moment-on-bcc-and-flips-on-fcc) (post, id `01a1eef2-610d-77a2-b6df-904643c47319`)
